Last updated: October 17, 2026
This guide is for plants and suppliers in southeast Coahuila (Saltillo, Ramos Arizpe, Derramadero and Arteaga) and for their customers and suppliers in the United States. The short answer: almost all of the region’s truck freight to the U.S. crosses at Laredo, and each industry has one document that tends to stop the shipment if it is not ready. At Eilan Trade Solutions we are customs brokers in the U.S. and in Mexico, with offices in Laredo, Texas, and Nuevo Laredo, and more than 30 years of experience. The same team prepares the Mexican pedimento and the U.S. entry for the same shipment, so classification, value and origin match on both sides of the bridge.
The real route: Saltillo to Laredo
- By road it is about 300 km (roughly 185 miles) from Saltillo to Nuevo Laredo, usually 3 to 4 hours of driving, not counting stops or bridge lines.
- Most commercial freight crosses at the World Trade Bridge.
- The Colombia Bridge, in Colombia, Nuevo León, next to the Coahuila state line, also takes freight from the region and is Laredo’s designated crossing for hazardous materials; the highest-risk classes may cross only there. See hazmat through the Colombia Bridge.
- Laredo also has a rail crossing; whether rail makes sense depends on volume, product and destination.
- In Laredo we have our own 200,000 sq ft warehouse for cross-dock, consolidation or holding freight while a document is completed. Eilan is CTPAT and OEA certified.
Most delays do not happen on the bridge but before it: an invoice that does not match the packing list, a part number that changes from one document to the next, or a tariff number nobody checked. That is why a document review before crossing pays off.
Automotive OEMs and Tier 1 and Tier 2 suppliers
- Into the U.S.: USMCA preference depends on the product’s rules of origin; the certification of origin may come from the importer, exporter or producer, with no official form, as long as it has the minimum data elements.
- Some auto parts and vehicles are under Section 232 measures specific to the automotive sector; the rate depends on the product and its origin.
- Into Mexico: components, tooling and returnable packaging usually enter as IMMEX temporary imports.
- The usual stopper: suppliers who do not deliver origin information on time. See USMCA rules of origin and automotive logistics.
Heavy trucks and engines
- Into the U.S.: trucks, engines and their parts are classified in great detail (type, gross vehicle weight, displacement), and the classification decides the duty and the measures that apply.
- Heavy trucks and some of their parts may be under Section 232 measures separate from the steel and aluminum ones; each part number is worth checking.
- Engines: the U.S. importer must confirm they meet the applicable emissions rules.
- The usual stopper: an engine or module described too generally on the invoice.
HVAC and appliances
- Section 232: Proclamation 11032 moved certain HVAC systems and components that are predominantly for residential use to the temporarily reduced 15% rate. Commercial or industrial units do not necessarily qualify; the rate depends on the product. See Section 232 and U.S. content.
- Into the U.S.: depending on the product, units may have to meet Department of Energy efficiency requirements, and units that contain refrigerant have their own rules.
- Into Mexico: compressors, motors, boards and sheet metal arrive as IMMEX inputs; some finished products sold in Mexico need a NOM.
- The usual stopper: not being able to show the unit is for residential use.
Steel and metal products (including Monclova)
- Into the U.S.: steel and its derivatives pay Section 232 duties; the rate depends on the product. The U.S.-content rule (25% only on non-U.S. content, with a 15% floor for USMCA goods) applies only to the steel and aluminum articles in Annex I-C of Proclamation 11032 (mobile industrial equipment and machinery), not to steel in general.
- CBP requires reporting the country where the steel was melted and poured; ask your supplier for it before shipping.
- Into Mexico: some steel pays antidumping duties. Since September 2026, hot-rolled steel from China and Vietnam carries final duties, which also apply to temporary imports. See antidumping duties in Mexico.
- The usual stopper: mill certificates that are incomplete or lack the melt country.
Mining and minerals
- In Mexico: exports of some minerals and metals require registration in the sector exporter registry (Padrón de Exportadores Sectorial), depending on the tariff item.
- Into the U.S.: classification depends on composition; a recent lab analysis avoids disputes about the product.
- Bulk or big-bag freight: the declared weight must match the scale ticket and the carta porte.
- The usual stopper: an analysis that does not belong to the lot on the truck.
Plastics and chemicals
- Into Mexico: resins and chemicals may need permits or notices from several agencies, depending on the substance.
- Into the U.S.: safety data sheet, the importer’s TSCA certification where it applies, and hazmat transport documents.
- Hazardous substances usually cross at the Colombia Bridge; plan the route before loading.
- The usual stopper: hazmat freight sent to the wrong bridge or without the correct hazard class on the documents.
Machinery and IMMEX inputs from the U.S.
- Under an IMMEX program, raw materials and components may stay in Mexico up to 18 months; machinery and equipment, for as long as the program is in force.
- The IMMEX company must keep an automated inventory control with the minimum information in Annex 24, and each pedimento must reconcile with it. More in Annex 24 for IMMEX.
- Used machinery may carry extra requirements, depending on the tariff item.
- If the buyer in Mexico has no Mexican importer registration, Eilan can help.
- The usual stopper: inventory discharge that lags behind the pedimentos.
Frequently asked questions
Does Eilan have an office in Saltillo?
No. Our offices are in Laredo, Texas, and Nuevo Laredo. We work with Coahuila companies remotely and handle clearance at the border, a few hours from their plants. You can send us the invoice, packing list and origin data by e-mail before the truck leaves, so we can review them in time.
How long does a truck take from Saltillo to Laredo?
The trip is about 300 km (roughly 185 miles), usually 3 to 4 hours of driving. Total time depends mostly on documents being ready and on the line at the bridge.
Does the Section 232 U.S.-content rule apply to my auto parts?
Generally, no. That rule in Proclamation 11032 covers only the steel and aluminum articles in Annex I-C (mobile industrial equipment and machinery). Auto parts may fall under other measures; the rate depends on the product, and we check it by part number.
Why send hazmat through the Colombia Bridge?
It is Laredo’s designated crossing for hazardous materials, and the highest-risk classes may cross only there. It is also close to the Coahuila state line.
Can you handle both the pedimento and the U.S. entry for the same shipment?
Yes. We are customs brokers in both countries, so the same team prepares both sides with the same data, and the Laredo warehouse gives room if a document is missing.
Send us your next shipment
Tell us the product, the plant of origin and the destination. Contact us or call +1 (956) 717-4150, Monday to Friday, 9 AM to 6 PM Central.